couple more pics of the stealth over brace.

craig wanted to keep the looks of a vintage z1 superbike.

 but would like a little more stability in the handling dept.  

 so i bent a piece of 1"X.065 wall 4130 chromoly tubing then split it lengthwise and tig welded it to the top of the arm.

that should stiffen it up a lil  ;)...

these are r1 triples converted to fit a j-model kz1000,with some material added and drilled for handlebar mounts..

this is the material for 3" fork leg extensions to gain back the lost length between the kz and r1 front ends.

 

 here are the extensions themselves.

 dustcap bushings that adapt the fz1 swingarm pivot to the kz pivot bolt.

 umm huh!

 a lil unorthodox milling of the fz swinger to seat the bearings deeper and narrow it up to fit the kz inside frame width.